| 基于摩擦模型的挤压铸造机压射机构动态配合 |
| |
| 引用本文： | 朱谦,游东东,朱权利. 基于摩擦模型的挤压铸造机压射机构动态配合[J]. 中国机械工程, 2021, 32(12): 1405-1413. DOI: 10.3969/j.issn.1004-132X.2021.12.003 |
| |
| 作者姓名： | 朱谦 游东东 朱权利 |
| |
| 作者单位： | 1.华南理工大学国家金属材料近净成形工程技术研究中心，广州,5106402.华南理工大学广东省金属新材料制备与成形重点实验室，广州,510640 |
| |
| 摘 要： | 配合间隙是影响压射机构服役和工艺控制的核心要素,为研究压射机构配合间隙,提出一种压射机构的摩擦模型,并基于MSC.MARC软件二次开发将摩擦模型与数值模拟整合,整合摩擦的数值模拟结果与不考虑摩擦的普通数值模拟结果和压射实验结果的对比验证了整合摩擦模型数值模拟的有效性和准确性.对2500 kN压铸机压射机构进行多循环压射...
|
| 关 键 词： | 压射机构 摩擦模型 挤压铸造 配合间隙 数值模拟 |
Dynamic Fit of Injection Mechanisms for Squeeze Casting Machines Based on Friction Model#br# |
| |
| ZHU Qian,YOU Dongdong,ZHU Quanli. Dynamic Fit of Injection Mechanisms for Squeeze Casting Machines Based on Friction Model#br#[J]. China Mechanical Engineering, 2021, 32(12): 1405-1413. DOI: 10.3969/j.issn.1004-132X.2021.12.003 |
| |
| Authors: | ZHU Qian YOU Dongdong ZHU Quanli |
| |
| Affiliation: | 1.National Engineering Research Center of Near-net-shape Forming for Metallic Materials,South China University of Technology,Guangzhou,5106402.Guangdong Key Laboratory for Advanced Metallic Materials Processing,South China University of Technology,Guangzhou,510640 |
| |
| Abstract: | Fit clearance was a key factor affecting service and process control of injection mechanisms, in order to study the fit clearance of injection mechanisms, a friction model of the injection mechanisms was proposed. Friction model and numerical simulation were integrated based on secondary development of MSC.MARC software. The results of numerical simulation integrated with friction were compared with those of ordinary numerical simulation without considering friction and the injection experiments to verify effectiveness and accuracy of numerical simulation integrated with friction. Multi-cycle injection processes for the injection mechanisms of 2500 kN squeezing casting machine were simulated, and the changing rules of the fit clearance were studied. In stages of injection and punch return, changes of the fit clearance are severe. In solidification stage, changes of the fit clearance are gentle. Main reason for drastic changes of the fit clearance is the uneven axial temperature distribution in shot-sleeve. |
| |
| Keywords: | injection mechanism friction model squeezing casting fitting clearance numerical simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
|
