| 22000kN大型伺服压力机电控系统研究与实现 |
| |
| 引用本文： | 李庆卓,戈海龙,张传锦,赵璨,李洪超,张博,怀向东,纪森,高建波. 22000kN大型伺服压力机电控系统研究与实现[J]. 机床与液压, 2021, 49(13): 99-102 |
| |
| 作者姓名： | 李庆卓 戈海龙 张传锦 赵璨 李洪超 张博 怀向东 纪森 高建波 |
| |
| 作者单位： | 山东省科学院激光研究所,山东济宁272000;济宁科力光电产业有限责任公司,山东济宁272000 |
| |
| 基金项目： | 山东省重点研发计划(2017CXGC0807)；山东省科学院重大创新专项 |
| |
| 摘 要： | 介绍了基于发那科伺服系统的大型伺服压力机机械结构及特点,并简单介绍了压力机多连杆的传动方式;结合伺服压力机的电气控制方式及特点,对发那科控制系统进行了阐述。将自主研发的上下位机系统与发那科动力系统相结合,实现整个伺服压力机自动化系统,并给出了其优异的性能指标。证明了此方案适合用于伺服压力机控制系统。
|
| 关 键 词： | 伺服压力机 电控系统 |
Research and Realization of 22 000 kN Large Servo Press Machine Electric Control System |
| |
| LI Qingzhuo,GE Hailong,ZHANG Chuanjin,ZHAO Can,LI Hongchao,ZHANG Bo,HUAI Xiangdong,JI Sen,GAO Jianbo. Research and Realization of 22 000 kN Large Servo Press Machine Electric Control System[J]. Machine Tool & Hydraulics, 2021, 49(13): 99-102 |
| |
| Authors: | LI Qingzhuo GE Hailong ZHANG Chuanjin ZHAO Can LI Hongchao ZHANG Bo HUAI Xiangdong JI Sen GAO Jianbo |
| |
| Abstract: | The mechanical structure and characteristics of the heavy servo press machine based on FANUC servo system were introduced, and the transmission mode of the multi link of the press was briefly introduced. Combined with the electric control mode and characteristics of the servo press machine, the FANUC control system was described. The whole servo press machine automation system was realized by combining the upper and lower computer system and the FANUC power system, and the excellent performance indices were also given. It is proved that this scheme is suitable for the control system of the servo press machine. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
