| 单片机控制的三坐标测量装置 |
| |
| 引用本文： | 邓中亮. 单片机控制的三坐标测量装置[J]. 计测技术, 1994, 0(2): 8-11,23 |
| |
| 作者姓名： | 邓中亮 |
| |
| 作者单位： | 清华大学精仪系!北京市，100084 |
| |
| 摘 要： | 介绍1种用8098单片机控制的三坐标测量装置。该测量装置用客栅传感器作位移检测元件，依靠系统的控制软件能直接利用实物模型或样件自动编制数控加工程序，并配有与其它微型计算机通讯的接口。系统运行稳定，有较好的性能价格比。
|
| 关 键 词： | 单片机 容栅 三坐标测量机 |
Research on 3-D Coordinate Measuring System Controlled by Single Chip Microcomputer |
| |
| Deng Zhongliang. Research on 3-D Coordinate Measuring System Controlled by Single Chip Microcomputer[J]. Metrology & Measurement Technology, 1994, 0(2): 8-11,23 |
| |
| Authors: | Deng Zhongliang |
| |
| Affiliation: | Deng Zhongliang |
| |
| Abstract: | A system controled by Single Chip Microcomputer, which can beused for three-dimension coordinate measurement, is introduced in this paper.It used Capacity Grating as displacement transducer.With the contiol softwareof system, it can make NC program automatically and has an interface tocommunicate with other microcomputers.The system can run reliably and has agood ratio of perfermanceand cost. |
| |
| Keywords: | Single chip microcomputer capacity grating NC program |
|
| 点击此处可从《计测技术》浏览原始摘要信息 |
|
点击此处可从《计测技术》下载全文 |
