|
|||||
|
|
| 矩形花键齿形成形研究 | |
| 引用本文： | 高锦张,徐波,贾俐俐.矩形花键齿形成形研究[J].锻压技术,2006,31(6):69-72. |
| 作者姓名： | 高锦张 徐波 贾俐俐 |
| 作者单位： | 1. 东南大学,材料科学与工程系,江苏,南京,210096 2. 应天职业技术学院,机电工程系,江苏,南京,210046 3. 南京工程学院,材料工程系,江苏,南京,210013 |
| 摘 要： | 运用有限元数值模拟的方法，针对长轴类矩形花键成形时齿形充型不完整的缺陷进行研究，探讨凹模模面的具体参数和毛坯前端倒角对其产生的影响，最终找到最佳的组合。成功地解决了齿形角隅充不满的难题。为现实生产提供理论依据，模拟结果能够很好地指导生产实践。 |
| 关 键 词： | 花键 冷挤压 附加应力 数值模拟 |
| 文章编号： | 1000-3940（2006）06-0069-04 |
| 收稿时间： | 2006-01-17 |
| 修稿时间： | 2006-01-17 |
Study on the root part fracture of the spline tooth forming |
|
| GAO Jin-zhang,XU Bo,JIA Li-li.Study on the root part fracture of the spline tooth forming[J].Forging & Stamping Technology,2006,31(6):69-72. | |
| Authors: | GAO Jin-zhang XU Bo JIA Li-li |
| Affiliation: | 1. Department of Material Science and Engineering, Southeast University, Najing Jiangsu 210096, China; 2. Yingtian College, Department of Mechanical and Electrical Engineering, Nanjing Jiangsu 210046, China; 3. Department of Material Engineering, Nanjing Institute of Mechanical Technology, Nanjing Jiangsu 210013, China |
| Abstract: | The thesis simulates the process of the spline forming by the FEM software. By studying the forming process of the spline tooth, the problem which is defect forming in the front of the tooth is discussed. The cause of the failure is mainly the parameters on the workface of the concave die and the angle in the front of the roughcast. After the simulation of the forming progress, the optimal selection is found and the problem is solved successfully, which provides the strong reference for the real production. The simulated result can effectively guide the productive practice. |
| Keywords: | spline cold extrusion extra stress numerical simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |