| 基于PULSE系统的叶片试验模态识别技术 |
| |
| 引用本文： | 刘石,徐自力,邓小文,刘磊,胡鹏飞.基于PULSE系统的叶片试验模态识别技术[J].广东电力,2012(1):23-26. |
| |
| 作者姓名： | 刘石 徐自力 邓小文 刘磊 胡鹏飞 |
| |
| 作者单位： | [1]广东电网公司电力科学研究院,广东广州510080 [2]西安交通大学,陕西西安710049 |
| |
| 基金项目： | 国家自然科学基金资助项目（50675169）;广东电网公司重点科研项目（K-GD2011-407） |
| |
| 摘 要： | 利用PULSE模态测试系统对某一等截面模拟叶片进行试验模态测量,获得其低阶模态频率、弯曲及扭转振型,将试验模态测量结果与有限元理论模态分析结果进行对比,2种方法的频率识别偏差在2%以内,振型识别结果一致,说明采用该试验模态分析方法可以有效进行叶片模态识别,能应用于工程实践。
|
| 关 键 词： | 试验模态分析 叶片 振型 频率 |
Experimental Blades Modal Recognition Technology Based on Pluse System |
| |
| LIU Shi,XU Zili,DENG Xiaowen,LIU Lei,HU Pengfei.Experimental Blades Modal Recognition Technology Based on Pluse System[J].Guangdong Electric Power,2012(1):23-26. |
| |
| Authors: | LIU Shi XU Zili DENG Xiaowen LIU Lei HU Pengfei |
| |
| Affiliation: | 1. Electric Power Research Institute of Guangdong Power Grid Corp., Guangzhou, Guangdong 510080, China; 2. Xi an Jiaotong University, Xian, Shanxi 710049, China) |
| |
| Abstract: | By use of Pluse system, a constant-section simulated blade is measured to obtain low-order modal frequency, curl and retortion mode of vibration. The measurement result and result by finite element modal analysis theory are compared. The error of frequency recognition of the two methods is no more than 2% and the modal recognition results are identical, meaning the method can be effective in modal recognition of blades and used in engineering practice. |
| |
| Keywords: | experimental modal analysis~ blade mode of vibratiom frequency |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
