| 基于缺陷分布形式的粉末冶金涡轮盘可靠度计算模型 |
| |
| 引用本文： | 魏大盛,杨晓光,王延荣.基于缺陷分布形式的粉末冶金涡轮盘可靠度计算模型[J].机械工程学报,2008,44(11):132-137. |
| |
| 作者姓名： | 魏大盛 杨晓光 王延荣 |
| |
| 作者单位： | 北京航空航天大学能源与动力工程学院 |
| |
| 摘 要： | 为研究微缺陷对粉末冶金涡轮盘可靠性的影响，在有限元分析结果的基础上，基于国内粉末盘中缺陷分布的概率特 点，建立针对低循环疲劳裂纹萌生和裂纹扩展失效模式的可靠度计算模型。该模型可计算不同缺陷分布形式、不同循环载荷条件下的轮盘可靠度。对某型粉末盘失效概率的分析表明：表面质量是导致粉末盘失效的重要因素，这同大量试验研究结果相一致，对粉末盘的设计和使用具有工程指导意义。
|
| 关 键 词： | 粉末冶金涡轮盘 可靠性 临界尺寸 缺陷 |
Model for Calculating the Reliability of Powder Metallurgy Turbine Disk Based on Distribution of Defects |
| |
| WEI Dasheng,YANG Xiaoguang,WANG Yanrong.Model for Calculating the Reliability of Powder Metallurgy Turbine Disk Based on Distribution of Defects[J].Chinese Journal of Mechanical Engineering,2008,44(11):132-137. |
| |
| Authors: | WEI Dasheng YANG Xiaoguang WANG Yanrong |
| |
| Affiliation: | School of Jet Propulsion, Beihang University |
| |
| Abstract: | In order to research the effect of micro defects on the performance of powder metallurgy(PM)turbine disk,a reliability calculation model based on the probabilistic character of distribution of defects is established by using the results of finite element analysis,which is aimed at the failure mode of crack initiation and propagation under low cycle fatigue.The model can be used to calculate the reliability of PM turbine disk under different distribution of defects and different cyclic loading conditions.The... |
| |
| Keywords: | Powder metallurgy turbine disk Defects Critical size Reliability |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
