| Abstract: | The presence of a weldline generally reduces the mechanical strength of injection molded parts. A typical remedy to eliminate the problem of weak weldline structure has been to increase the melt temperature. This, however, is not an acceptable solution in some situations. A general solution to the weak weldline problem requires an in-depth understanding of the thermomechanical history of the injection molding process. A theoretical model for the strength of weldlines is presented that provides a comprehensive physical insight of the bonding process at the weldline interface. The model is based on the self-diffusion of molecular chains across the polymer-polymer interface and the frozen-in orientation that remains parallel to the interface. Both factors are analyzed separately and then superimposed to predict the strength of weldlines from known processing conditions and geometry. Experimental results show good correlation with predictions. |
