首页 | 本学科首页   官方微博 | 高级检索  
     

基于TMS320F2812和USBI00的CAN—USB总线通信系统设计
引用本文:叶成,刘晓刚,刘春生.基于TMS320F2812和USBI00的CAN—USB总线通信系统设计[J].现代电子技术,2011,34(2):176-178,181.
作者姓名:叶成  刘晓刚  刘春生
作者单位:1. 中国航空研究院609所,江苏,南京,211102
2. 南京航空航天大学,江苏,南京,210016
摘    要:介绍了一种基于DSP的CAN控制器和USB芯片的USB总线和CAN总线的通信模块的设计,提出了一种使用USB接口实现CAN总线网络与计算机连接的方案。利用USBl00芯片可在不了解任何USB协议的情况下,完成计算机RS232串口升级为USB接口,同时CAN接口采用DSP片上CAN控制器,硬件设计极为简单。在DSP的控制下,PC机与CAN节点可以双向通信,通信波特率可高达1Mb/s,传输数据稳定,可靠。实验证明,运用TMS320F2812片上eCAN模块来构成CAN总线通信系统更为简单,实用。

关 键 词:USB  CAN总线  eCAN  TMS320F2812

Design of CAN-USB Communication System Based on TMS320F2812 and USB100
YE Cheng,LIU Xiao-gang,LIU Chun-sheng.Design of CAN-USB Communication System Based on TMS320F2812 and USB100[J].Modern Electronic Technique,2011,34(2):176-178,181.
Authors:YE Cheng  LIU Xiao-gang  LIU Chun-sheng
Affiliation:1.NO.609 Institute,Chinese Aeronautical Establishment,Nanjing 211102,China;2.Aeronautics and Astronautics University of Nanjing,Nanjing 210016,China)
Abstract:The design of a communication module between USB and CAN bus based on CAN controller of DSP and USB chip is presented. A scheme that implements the connection between CAN bus network and the computer by USB interface is proposed.. With the help of USB100, it can update the RS232 serial port of a computer to USB interface in the situation of unknowing anything about USB protocol. The hardware of system is extremely simple as a result of using CAN controller on DSP chip. Under the control of DSP, PC and CAN node can communicate with the baud rate of 1 Mb/s. The data transmission is stable and reliable. The experimental results show that the system of CAN bus communication made up of eCAN module which is on the chip of TMS320F2812 is simple and much more practical.
Keywords:USB  eCAN  TMS320F2812
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号