| 洗发水瓶盖注射模设计 |
| |
| 引用本文： | 张维合.洗发水瓶盖注射模设计[J].模具工业,2009,35(10):47-51. |
| |
| 作者姓名： | 张维合 |
| |
| 作者单位： | 东莞南博职业技术学院,广东东莞,523083 |
| |
| 摘 要： | 介绍了1副洗发水瓶盖注射模,模具的动模采用外螺纹自动脱模机构和圆弧侧向抽芯机构,外螺纹自动脱模机构动力来源于液压缸,圆弧侧向抽芯机构不需要任何外部动力。模具结构简单,设计新颖,可供同行借鉴。
|
| 关 键 词： | 洗发水瓶盖 圆弧抽芯 外螺纹自动脱模机构 液压 螺纹型芯 强制脱模 |
Design of injection mould for shampoo bottle cap |
| |
| ZHANG Wei-he.Design of injection mould for shampoo bottle cap[J].Die & Mould Industry,2009,35(10):47-51. |
| |
| Authors: | ZHANG Wei-he |
| |
| Affiliation: | ZHANG Wei-he (Dongguan Nanbo Polytechnic, Dongguan, Guangdong 523083, China) |
| |
| Abstract: | An injection mould for a shampoo bottle cap was developed in which an auto-demolding device by male thread and a core-pulling mechanism in circular arc at the moving half were applied. A hydraulic cylinder gives motivity to the auto-demolding device by male thread while the core-pulling in circular arc doesn＇t need any outside power. |
| |
| Keywords: | shampoo bottle cap core-pulling in circular arc auto-demolding device by male thread hydraulic threaded core forced demolding |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
