| 铸造永磁合金模具的改进 |
| |
| 引用本文： | 陈茂明 梁炜. 铸造永磁合金模具的改进[J]. 电工合金, 2007, 0(4): 38-39 |
| |
| 作者姓名： | 陈茂明 梁炜 |
| |
| 作者单位： | [1]陕西金山电器股份有限公司,陕西咸阳712021 [2]广东省钢铁研究所,广州510640 |
| |
| 摘 要： | 对铸造永磁合金的传统模具进行改进，减少横浇道的数量，增加了单模的产品数量。使熔炼工序产品的成品率从原来的35％～40％提升到50％～65％，大大提高了生产效率。
|
| 关 键 词： | 模具 横浇道 熔炼 成品率 永磁合金 |
| 文章编号： | 1671-8887（2007）04-0038-02 |
| 收稿时间： | 2007-10-19 |
Improvement on Casting Mold of Permanent Magnet Alloy |
| |
| CHEN Mao-ming, LIANG Wei. Improvement on Casting Mold of Permanent Magnet Alloy[J]. , 2007, 0(4): 38-39 |
| |
| Authors: | CHEN Mao-ming LIANG Wei |
| |
| Abstract: | The traditional casting mold used for permanent magnet alloy was improved. The number of horizontal runner was rednced and the number of single-mold products was increased. Which makes the smelting processes yield increased from 35%-40% to 50%-65%, greatly enhance production efficiency. |
| |
| Keywords: | mold horizontal runner smelting yield permanent magnet alloy |
| 本文献已被 维普 等数据库收录！ |
