Acoustic Harmonic Generation Due to Thermal Embrittlement of Inconel 718 |
| |
Authors: | D. J. Barnard G. E. Dace O. Buck |
| |
Affiliation: | (1) Ames Laboratory-USDOE and Materials Science and Engineering Department, Iowa State University, 50011 Ames, Iowa |
| |
Abstract: | This paper describes an attempt to characterize the deterioration of a structural material's mechanical properties by nonlinear acoustics. In this particular case, the damage was caused by “thermal embrittlement” during which the material, here the nickel-based alloy Inconel 718, loses a significant fraction of its fracture toughness. Harmonic generation was the experimental method used to characterize the microstructural changes in the material as a function of exposure time at elevated temperatures. Tests were performed on two heats of Inconel 718 with slightly different chemistries, with one heat showing particular sensitivity of the fracture toughness to the elevated temperature exposure with corresponding higher changes in the nonlinearity parameter. As a mechanical measure of the fracture toughness deterioration, a small specimen punch test was used in which the ductility of a thin slice of material is determined. A clear difference between the two heats was noted in the metallographic examination, which is reflected in the harmonic generation as well as the punch test data. An explanation for the changes of the harmonic generation during the embrittlement process is speculative at the present time. |
| |
Keywords: | Thermal embrittlement fracture toughness fractography strain-to-failure small punch test acoustic nonlinearity second harmonic amplitude |
本文献已被 SpringerLink 等数据库收录! |
|