| E7/6型精梳机锡林梳理面对精梳工艺的影响 |
| |
| 引用本文： | 任家智.E7/6型精梳机锡林梳理面对精梳工艺的影响[J].棉纺织技术,2004,32(8):20-23. |
| |
| 作者姓名： | 任家智 |
| |
| 作者单位： | 中原工学院 |
| |
| 摘 要： | 精梳机锡林梳理面的大小对锡林的梳理工艺及分离接合工艺具有重要影响。运用计算机对E7/ 6型精梳机采用 112°锡林梳理面及不同的锡林定位、不同落棉隔距时 ,计算与分析了锡林的梳理时间、钳板的开口定时、分离罗拉倒入机内的棉网长度等参数。得出在E7/ 6型精梳机上采用 112°梳理面的锡林时 ,应采用 36分度的锡林定位、较大的落棉隔距及较晚的分离罗拉顺转定时。
|
| 关 键 词： | 精梳机 锡林梳理面 锡林梳理时间 钳板开闭口时间 精梳_Y-艺 |
| 文章编号： | 1001-7415(2004)08-0020-04 |
| 修稿时间： | 2004年3月4日 |
Influence on Combing Process of E7/6 Comber Cylinder Combing Surface |
| |
| Ren Jiazhi.Influence on Combing Process of E7/6 Comber Cylinder Combing Surface[J].Cotton Textile Technology,2004,32(8):20-23. |
| |
| Authors: | Ren Jiazhi |
| |
| Affiliation: | Zhongyuan Institute of Technology |
| |
| Abstract: | The scale of comber cylinder surface has very important effect on combing technology and detaching & piecing technology. In this paper, the combing time, timing of nipper opening-closing, web length of detaching roller reverse feeding and so on parameters are calculated and analysed by computerized of the 112 cylinder combing surface, locations of different cylinders and different noil gauge. The calculation reveals that 36 index cylinder location, larger noil gauge and later timing of detaching roller clockwise revolving should be adopted in E7/6 comber. |
| |
| Keywords: | Comber Cylinder Combing Surface Cylinder Combing Time Nipper Opening-closing Time Combing Technology |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
