Miscibility and hydrolytic degradation in alkaline solution of poly(l-lactide) and poly(methyl methacrylate) blends

Poly(l-lactide) (PLLA) was melt blended with poly(methyl methacrylate) (PMMA) using a two-roll mill. The miscibility and hydrolytic degradation of the blend films were characterized. It was found that PLLA/PMMA blend has high miscibility in the amorphous state because only single T_g was observed in the DSC and DMA measurements. In alkaline solution, the hydrolytic degradation rate of the blends whose PMMA content is higher than 30 wt% was decelerated while the rate of the blends whose PMMA content is lower than 30 wt% was accelerated. That is, the hydrolytic degradation rate of the blends could be widely controlled by PMMA content in the blend. It was also found that only PLLA was hydrolyzed and eluted into alkaline solution, while PMMA remained during alkaline hydrolysis.