Preparation and characterization of innovative cellulose diacetate/epoxy resin blends modified by isophorone diamine

Cellulose diacetate (CA)/epoxy resin (EP) blends with excellent mechanical performance were prepared with simple blending followed by curing with isophorone diamine (IPDA). The reaction between the amino groups of IPDA and epoxide groups of EP was confirmed by Fourier transform infrared spectroscopy. Scanning electron microscopy revealed that the cured EP particles gradually became larger and closer to each other to form semi‐interpenetrating polymer networks in the CA matrix; this contributed to the improved mechanical properties of the CA/EP blends. Dynamic rheological experiments indicated that the CA/EP blends with semi‐interpenetrating polymer networks retained processability. After the introduction of a low content (5–10 phr) of IPDA, the mechanical properties of the CA/EP blends were significantly enhanced. With the addition of 20–30‐phr IPDA, the CA/EP blend exhibited a tensile strength of 77 MPa, a flex strength of 65 MPa, a flex modulus of 2.6 GPa, and a hardness of 94 HD; these values were much higher than those of the pristine CA/EP binary blend. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44151.