| 采用CAE分析柴油机冲缸垫与机体顶面变形大故障 |
| |
| 引用本文： | 张运泉,沈捷,杨剑,蓝宇翔,谭言旺.采用CAE分析柴油机冲缸垫与机体顶面变形大故障[J].柴油机,2009,31(6):34-37. |
| |
| 作者姓名： | 张运泉 沈捷 杨剑 蓝宇翔 谭言旺 |
| |
| 作者单位： | 广西玉柴机器股份有限公司,广西玉林,537005 |
| |
| 摘 要： | 采用CAE方法分析了某新开发的柴油机试验过程中不断出现的冲缸垫与机体顶面变形大故障,发现故障系机体受力后产生严重塑性变形所致。根据分析结果,提出了加长缸盖螺栓长度以加深机体螺孔,同时加深缸盖螺栓孔的沉孔深度,使所有螺纹都处于缸套支承面以下的优化方案,计算与试验结果表明,优化后该柴油机机体的受力变形大幅减少,通过了500h冷热冲击可靠性试验,完成了产品开发。
|
| 关 键 词： | 气缸盖垫片 机体变形 CAE 缸盖螺栓 |
The CAE Analysis and Research on the Deformation of Cylinder Block |
| |
| Zhang Yunquan,Shen Jie,Yang Jian,Lan Yuxiang,Tan Yanwang.The CAE Analysis and Research on the Deformation of Cylinder Block[J].Diesel Engine,2009,31(6):34-37. |
| |
| Authors: | Zhang Yunquan Shen Jie Yang Jian Lan Yuxiang Tan Yanwang |
| |
| Affiliation: | Zhang Yunquan,Shen Jie,Yang Jian,Lan Yuxiang,Tan Yanwang(Yuchai Machinery Company Limited,GuangxiYulin537005) |
| |
| Abstract: | Big problems occurred in the durability test of a new-developed engine.The problems of gas leak and serious deformation of cylinder block are analyzed by CAE.It is found that the problems are caused by plastic deformation because of force on cylinder block.Based on the analysis results,the cylinder head's bolt is lengthened and the bolt hole is arranged deeper,so that all the thread is in the cylinder block.The calculation results showed that the deformation is improved.It passed 500h hot and cold impact te... |
| |
| Keywords: | CAE |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
