首页 | 本学科首页   官方微博 | 高级检索  
     

压力容器用工业纯钛板材声发射衰减特性
引用本文:王瑞恩,张万岭,沈功田,李丽菲. 压力容器用工业纯钛板材声发射衰减特性[J]. 无损检测, 2012, 0(3): 22-24,37
作者姓名:王瑞恩  张万岭  沈功田  李丽菲
作者单位:[1]河北大学,保定071000 [2]中国特种设备检测研究院,北京100013 [3]北京航空航天大学,北京100191
基金项目:国家“十二五”科技支撑计划资助项目(2011BAK06803).
摘    要:通过对压力容器用工业纯钛板材GR2的声发射衰减特性的研究发现,随着板材厚度从6cm增加到20cm,其声发射的衰减趋势呈增大现象。通过对其不同厚度板材声速的计算发现,声速随着板厚的变化并不出现较大的波动,该结论对钛合金压力容器的声发射特性研究有一定的参考指导意义。

关 键 词:声发射  衰减  波速  压力容器  钛板材

Attenuation Characteristics of Acoustic Emission of Industrial Pure Titanium Sheet Used in Pressure Vessel
WANG Rui-En,ZHANG Wan-Ling,SHEN Gong-Tian,LI Li-Fei. Attenuation Characteristics of Acoustic Emission of Industrial Pure Titanium Sheet Used in Pressure Vessel[J]. Nondestructive Testing, 2012, 0(3): 22-24,37
Authors:WANG Rui-En  ZHANG Wan-Ling  SHEN Gong-Tian  LI Li-Fei
Affiliation:1. Hebei University, Baoding 071000, China; 2. China Special Equipment Inspection and Research Institute, Beijing 100013, China; 3. Beijing University of Aeronautics and Astronautics, Beijing 100191, China)
Abstract:The attenuation characteristics of acoustic emission of the industrial pure titanium sheet GR2 used in the pressure vessel was studied. The conclusion was that the attenuation of acoustic emission was increasing as the plate thickness increased from 6 cm to 20 cm, and the velocity didn't change greatly with the thickness fluctuating by calculation. The experiment is of certain reference significance for the pressure vessel made of titanium alloy when assessed by acoustic emission.
Keywords:Acoustic emission  Attenuationl Velocityl Pressure vessell Titanium sheet
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号