首页 | 本学科首页   官方微博 | 高级检索  
     

黄铜化学着色膜层制备及表征
引用本文:周栋,王瑀,杜伟,丁毅,马立群.黄铜化学着色膜层制备及表征[J].表面技术,2010,39(4):50-52,86.
作者姓名:周栋  王瑀  杜伟  丁毅  马立群
作者单位:南京工业大学,南京,210009;南京工业大学,南京,210009;南京工业大学,南京,210009;南京工业大学,南京,210009;南京工业大学,南京,210009
摘    要:采用3种黄铜表面化学着色工艺,分别在黄铜表面得到了黑色、红色和银白色膜层。用SEM观察了膜层的表面形貌,用EDS对膜层进行了成分分析,用XRD对膜层进行了物相分析,并测试了着色黄铜的耐蚀性和结合力性能。实验结果表明,3种着色黄铜的耐蚀性较好,且着色膜层与基体结合良好。

关 键 词:黄铜  化学着色  膜层成分  性能
收稿时间:2010/4/29 0:00:00
修稿时间:2010/8/10 0:00:00

Preparation and Characterization of Film by Chemical Coloring on Brass
ZHOU Dong,WANG Yu,DU Wei,DING Yi and MA Li-qun.Preparation and Characterization of Film by Chemical Coloring on Brass[J].Surface Technology,2010,39(4):50-52,86.
Authors:ZHOU Dong  WANG Yu  DU Wei  DING Yi and MA Li-qun
Affiliation:ZHOU Dong,WANG Yu,DU Wei,DING Yi,MA Li-qun(Nanjing University of Technology,Nanjing 210009,China)
Abstract:Three techniques of chemical coloring on brass surface were studied.A fine black,red and silvery white plating on brass and zipper were obtained by experiments.The morphology,composition of the tin plating were investigated by the SEM,EDS and XRD techniques.The results of the performance measurement showed that the coating has fine corrosion resistance and binding force by man-made corrosion test,coating binding force test.
Keywords:brass  chemical coloring  composition of film  characteristic  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《表面技术》浏览原始摘要信息
点击此处可从《表面技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号