Morphology transformations of pentacene on an UV-patternable polymer insulator and their effect on performance of flexible organic thin-film transistors

This work presents a low temperature with high resolution capability UV-patternable polymer, i.e. mr-UVCur06, for use as a gate insulator in OTFTs, by investigating the morphology transformation of pentacene deposited on the mr-UVCur06. The device structure is polyethylene terephthalate (PET)/indium-tin oxide (ITO)/mr-UVCur06/pentacene/Au (source/drain). In addition to its solution-processable capability, mr-UVCur06 is directly patterned by UV light in a low-temperature process. UV/ozone post-treatment of the patternable mr-UVCur06 can illuminate organic contaminants from its surface and increases surface energy. Experimental results indicate that a high surface energy existing at the mr-UVCur06 surface has produced in a larger ratio of I_{thin film phase}/I_{triclinic bulk phase} in pentacene. Then, the distance of pentacene molecular crystal structure, which is arranged in the thin film phase, is shorter than that in triclinic bulk phase. The performance of pentacene-based OTFTs can be enhanced with few contaminants and a high surface energy on the UV-patternable gate insulator. By performing UV/ozone post-treatment on the mr-UVCur06 insulator surface for 60 s, the OTFTs demonstrate a mobility, on/off drain current ratio, and V_T of 0.34 cm²/V s, 5.5 × 10⁴, and 2.5 V, respectively. Furthermore, the low-temperature photopatternable polymer dielectric paves the way for a relatively easy and low-cost fabrication of an OTFT array without expensive and complicated photolithography and dry etching.