| 基于红外脉冲相位热成像技术的玻璃钢深度测量 |
| |
| 引用本文： | 俞嘉捷,伍耐明,曾智,陈大鹏. 基于红外脉冲相位热成像技术的玻璃钢深度测量[J]. 红外与激光工程, 2012, 41(7): 1893-1898 |
| |
| 作者姓名： | 俞嘉捷 伍耐明 曾智 陈大鹏 |
| |
| 作者单位： | 1. 北京航空航天大学能源与动力工程学院,北京,100191
2. 首都师范大学物理系,北京,100037 |
| |
| 基金项目： | 国家自然科学基金联合基金 |
| |
| 摘 要： | 为探索红外热成像技术用于玻璃钢材料厚度测量的方法,文中使用闪光灯脉冲激励热成像的方法对玻璃钢平底洞标准件进行检测,通过脉冲相位法(PPT)进行数据处理,提取频域信息、消除噪声,并在试验设备采样频率不能满足盲频测量要求的限制条件下,建立相位阈值,完成了厚度测量。试验结果表明,玻璃钢试件的物理特性会对测量结果造成误差,但经数值优化后可在一定厚度范围内得到和实际深度接近的探测值,该方法可以作为玻璃钢厚度测量的有效手段。
|
| 关 键 词： | 脉冲相位热成像 深度测量 红外热波 玻璃钢 |
FRP depth measurement based on pulsed phase thermography |
| |
| Yu Jiajie , Wu Naiming , Zeng Zhi , Chen Dapeng. FRP depth measurement based on pulsed phase thermography[J]. Infrared and Laser Engineering, 2012, 41(7): 1893-1898 |
| |
| Authors: | Yu Jiajie Wu Naiming Zeng Zhi Chen Dapeng |
| |
| Affiliation: | 1 (1.School of Jet Propulsion,Beihang University,Beijing 100191,China; 2.Department of Physics,Capital Normal University,Beijing 100037,China) |
| |
| Abstract: | Aiming at developing a method for depth measurement in fiber reinforced plastic(FRP) by thermography,flash pulse excitation was applied to test an FRP specimen with plate-bottom holes.The data was processed to accomplish depth measurement using pulsed phase thermography(PPT) method including extracting frequency curve and removing the impact of noise.A minimum phase threshold was also established when the sampling frequency could not meet the demand of measuring blind frequency.Experiment results show that physical characteristics of FRP can affect the measurement accuracy.But through the optimization algorithm,the depth which is close to the actual value of the detection can be obtained.Within a certain range of thickness,PPT method can still be an effective method for FPR depths measurement. |
| |
| Keywords: | pulse phase thermography depth survey infrared thermal wave fiber reinforced plastic(FRP) |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
