| 三维非轴对称零件旋压成形机理研究 |
| |
| 引用本文： | 夏琴香.三维非轴对称零件旋压成形机理研究[J].机械工程学报,2004,40(2):153-156. |
| |
| 作者姓名： | 夏琴香 |
| |
| 作者单位： | 华南理工大学机械工程学院,广州,510640 |
| |
| 基金项目： | 国家自然科学基金(50275054)，广东省自然科学基金(020923)资助项目 |
| |
| 摘 要： | 提出采用旋压技术直接加工各部分轴线间相互平行或成一定夹角的三维非轴对称薄壁空心零件的工艺方法,探讨了该成形技术的工作原理、成形过程的特点及变形机理,并预测了其推广应用前景。提出的旋压成形装置可使旋轮在随机床主轴作回转运动的同时,沿垂直于机床轴线方向作径向进给运动。
|
| 关 键 词： | 非轴对称零件 旋压技术 成形机理 |
| 修稿时间： | 2003年2月24日 |
INVESTIGATION ON THE MECHANISM OF THE SPINNING TECHNOLOGY OF THE 3D NON-AXISYMMETRIC PARTS |
| |
| Xia Qinxiang.INVESTIGATION ON THE MECHANISM OF THE SPINNING TECHNOLOGY OF THE 3D NON-AXISYMMETRIC PARTS[J].Chinese Journal of Mechanical Engineering,2004,40(2):153-156. |
| |
| Authors: | Xia Qinxiang |
| |
| Affiliation: | South China University of Technology |
| |
| Abstract: | A new type of spinning technology is presented. By this technology, the 3D non-axisymmetric thin-walled hollow part, a portion axis of the part is parallel or has a certain included angle to each other, can be formed directly. It mainly focuses on the working principle, forming characteristic and deformation mechanism. The application prospect of this technology is also depicted. The rollers of the forming apparatus can feed to the main axis, while rotating around it. |
| |
| Keywords: | Non-axisymmetric parts Spinning technology Deformation mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
