首页 | 本学科首页   官方微博 | 高级检索  
     

X1215易切削钢连铸坯成分偏析的研究
引用本文:王宏斌, 林腾昌, 朱荣, 段飞虎, 李联生, 张志强, 王勇. X1215易切削钢连铸坯成分偏析的研究[J]. 工程科学学报, 2011, 33(S1): 161-164. DOI: 10.13374/j.issn1001-053x.2011.s1.034
作者姓名:王宏斌  林腾昌  朱荣  段飞虎  李联生  张志强  王勇
摘    要:采用化学分析和低倍酸浸实验方法研究了低碳高硫易切削钢连铸坯的C、Si、Mn、P、S的成分偏析特征并分析其形成原因.结果表明,连铸坯的C、Si、Mn、P、S的偏析度均在0.9~1.1之间,S、P元素存在中心负偏析,低倍酸浸实验检测发现连铸坯存在中心疏松.分析认为,中心疏松是导致中心元素负偏析的主要原因.

关 键 词:易切削钢  成分  偏析  疏松
收稿时间:2011-08-01

Study on composition segregation of X1215 free-cutting steel continuous casting billet
WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong. Study on composition segregation of X1215 free-cutting steel continuous casting billet[J]. Chinese Journal of Engineering, 2011, 33(S1): 161-164. DOI: 10.13374/j.issn1001-053x.2011.s1.034
Authors:WANG Hong-bin  LIN Teng-chang  ZHU Rong  DUAN Fei-hu  LI Lian-sheng  ZHANG Zhi-qiang  WANG Yong
Abstract:The characteristics and reasons of C,Si,Mn,P,S composition segregations in low carbon high sulfur free cutting steel were researched by chemical analysis and hot hydrochloric acid. The results show that the segregation degree of elements (C, Si, Mn, P, S) is between 0.9 and 1.1,S and P elements are negative segregation at the billet center region,and the center area of continuous casting billet is porosity. The analyses show that the center porosity is the main reason of element negative segregations at the center area.
Keywords:free cutting steel  composition  segregation  porosity
点击此处可从《工程科学学报》浏览原始摘要信息
点击此处可从《工程科学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号