| 汽车驱动桥桥壳强度与模态的有限元分析 |
| |
| 引用本文： | 陈国荣,唐绍华.汽车驱动桥桥壳强度与模态的有限元分析[J].机械设计与制造,2010(2). |
| |
| 作者姓名： | 陈国荣 唐绍华 |
| |
| 作者单位： | 1. 南京工业大学机械与动力工程学院,南京,210009;南京航空航天大学机电学院,南京,210016
2. 南京工业大学机械与动力工程学院,南京,210009 |
| |
| 基金项目： | 国防科工委十一五军品配套研制项目(JPPT-115-2-1233) |
| |
| 摘 要： | 介绍了汽车驱动桥桥壳结构强度和模态有限元分析的研究背景,论述了ANSYS Workbench软件的有限元分析功能和优点。采用三维CAD软件UG建立了汽车驱动桥桥壳的三维几何模型,然后将其导入ANSYS Workbench软件中进行了结构强度和模态有限元分析。仿真结果表明,汽车驱动桥桥壳的强度满足设计要求,并且具有良好的抗振性。
|
| 关 键 词： | 汽车驱动桥桥壳 强度 模态 有限元分析 |
Finite element analysis of strength and modal on automotive drive axle housing |
| |
| CHEN Guo-rong,TANG Shao-hua.Finite element analysis of strength and modal on automotive drive axle housing[J].Machinery Design & Manufacture,2010(2). |
| |
| Authors: | CHEN Guo-rong TANG Shao-hua |
| |
| Affiliation: | 1Nanjing University of Technology/a>;Nanjing 210009/a>;China;2Nanjing University of Aeronautics and Astronautics/a>;Nanjing 210016/a>;China |
| |
| Abstract: | The finite element analysis research background of strength and modal on automobile driving axle housing structural was introduced,and the finite element analysis function and advantage of ANSYS Workbench software was elaborated. The three dimensional geometry model of automobile driving axle housing was established by using the three dimensional CAD software UG,Then the structural strength and the modal finite element analysis was carried on in ANSYS Workbench software. The simulation result indicats that ... |
| |
| Keywords: | Automobile driving axle housing Strength Modal Finite element analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
