| 激光熔覆制备B_4C_p/Ni合金复合涂层的组织与性能 |
| |
| 引用本文： | 张丽,张伟强. 激光熔覆制备B_4C_p/Ni合金复合涂层的组织与性能[J]. 热加工工艺, 2006, 0(6) |
| |
| 作者姓名： | 张丽 张伟强 |
| |
| 作者单位： | 辽宁省交通高等专科学校道桥系 辽宁沈阳110122(张丽)，辽宁工程技术大学 辽宁阜新123000(张伟强) |
| |
| 摘 要： | 对Ni60合金粉末中添加B4C陶瓷颗粒的激光熔覆组织结构和力学性能做了研究。结果表明,加入陶瓷颗粒可增加熔覆层中强化相数量,提高涂层的硬度和耐磨性,在陶瓷颗粒加入量达到15%时效果最好。
|
| 关 键 词： | 激光熔覆 碳化硼 复合涂层 耐磨性 |
Microstructure and Property of B_4C_p/Ni Alloy Composite Coating Prepared by Laser Cladding |
| |
| ZHANG Li,ZHANG Wei-qiang. Microstructure and Property of B_4C_p/Ni Alloy Composite Coating Prepared by Laser Cladding[J]. Hot Working Technology, 2006, 0(6) |
| |
| Authors: | ZHANG Li ZHANG Wei-qiang |
| |
| Affiliation: | ZHANG Li1,ZHANG Wei-qiang2 |
| |
| Abstract: | The microstructure and mechanical property of laser cladding Ni60 powder with addition of B4C ceramic particles was studied. The results show that the addition of B4C particles can increase the amount of the reinforced phase, the hardness and wear resistance of the coating are increased as well as.The effect is best when the addition of B4C particles reaches 15%. |
| |
| Keywords: | laser cladding B_4C composite coating wear resistance |
| 本文献已被 CNKI 等数据库收录！ |
