首页 | 本学科首页   官方微博 | 高级检索  
     

一种新颖的具有HEMT和GaAs MMIC的Ku波段低噪声放大器
引用本文:戴永胜.一种新颖的具有HEMT和GaAs MMIC的Ku波段低噪声放大器[J].电子与信息学报,1992,14(6):629-632.
作者姓名:戴永胜
作者单位:南京电子器件研究所 南京
摘    要:本文介绍了一种具有高电子迁移率晶体管(HEMT)和砷化镓单片微波集成电路(GaAs MMIC)的Ku波段低噪声放大器。在11.7~12.2GHz频率范围内,该放大器的噪声系数小于1.9dB,相关增益大于27dB,输入和输出驻波比小于1.4。放大器第一级采用了HEMT和微波串联电感反馈技术,放大器未级采用了Ku波段GsAs MMIC。设计的关键是采用微波串联电感反馈方法同时获得最佳噪声和最小输入驻波匹配。放大器的输入端和输出端均为BJ-120波导。

关 键 词:低噪声放大器    高电子迁移率晶体管(HEMT)    砷化镓单片微波集成电路(GaAs  MMIC)    微波串联电感反馈
收稿时间:1991-5-9
修稿时间:1992-4-16

A NOVEL Ku-BAND LOW NOISE AMPLIFIER WITH HEMT AND GaAs MMIC
Dai Yongsheng.A NOVEL Ku-BAND LOW NOISE AMPLIFIER WITH HEMT AND GaAs MMIC[J].Journal of Electronics & Information Technology,1992,14(6):629-632.
Authors:Dai Yongsheng
Affiliation:Nanjing Electronic Devices Institute Nanjing 210016
Abstract:A novel Ku-band low noise amplifier with high electron mobility transis-ror (HEMT) and GaAs monolithic microwave integrated circuit (MMIC) has been demonstrated. Its noise figure is less than 1.9dB with an associated gain over 27dB and an input-output VSWR less than 1.4 in the frequency range of 11.7-12.2 GHz. The HEMT and the microwave series inductance feedback technique arc used in the first stage of the amplifier, and the Ku-band MMIC is used in the last stage. The key to this design is to achieve a simultaneous optimum noise match and a minimum input VSWR match by using the microwave series inductance feedback method. The BJ-120 waveguides are used in both input and output of the amplifier.
Keywords:Low noise amplifiers  High electron mobility transistor (HEMT)  GaAs monolithic microwave integrated circuit (MMIC)  Microwave series inductance feedback
本文献已被 CNKI 等数据库收录!
点击此处可从《电子与信息学报》浏览原始摘要信息
点击此处可从《电子与信息学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号