首页 | 本学科首页   官方微博 | 高级检索  
     

超声对7050铝合金凝固组织影响的数值模拟
引用本文:邵高建,胡仕成,夏晨希,管付如. 超声对7050铝合金凝固组织影响的数值模拟[J]. 特种铸造及有色合金, 2011, 31(2): 119-122,201. DOI: 10.3870/tzzz.2011.02.008
作者姓名:邵高建  胡仕成  夏晨希  管付如
作者单位:中南大学机电工程学院,现代复杂装备设计与极端制造教育部重点实验室
基金项目:国家重点基础研究发展计划(973计划)资助项目
摘    要:采用Procast-CAFE模块,建立了7050铝合金形核和晶粒生长的数学模型,模拟了7050铝合金在不同功率超声作用下组织的演化过程。结果表明,随着超声功率增大,熔体形核率增大,晶粒细化效果更好,组织分布更均匀,平均晶粒尺寸更小。模拟结果与试验结果符合。

关 键 词:7050铝合金  超声铸造  CAFE  微观组织模拟  晶粒尺寸

Numerical Simulation and Experimental Verification on Effects of Ultrasonic Treatment on Solidification Structure of 7050 Aluminum Alloy
Shao Gaojian,Hu Shicheng,Xia Chenxi,Guan Furu. Numerical Simulation and Experimental Verification on Effects of Ultrasonic Treatment on Solidification Structure of 7050 Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2011, 31(2): 119-122,201. DOI: 10.3870/tzzz.2011.02.008
Authors:Shao Gaojian  Hu Shicheng  Xia Chenxi  Guan Furu
Affiliation:Shao Gaojian,Hu Shicheng,Xia Chenxi,Guan Furu(Key Laboratory of Modern Complex Equipment Design and Extreme Manufacturing,Ministry of Education,College of Mechanical and Electrical Engineering,Central South University,Changsha,China)
Abstract:Nucleation and grain growth model of 7050 aluminum alloy were established based on ProCAST-CAFE modules to predict the microstructural evolution of the alloy in condition of different ultrasonic powers.The results verify that,with increasing in ultrasonic power,nucleation rate in the aluminum alloy melt is increased,which results in the apparent refinement of grain size and uniform distribution of microstructure as well as fine average grain size.The simulated results are well in agreement with experimental...
Keywords:CAFE
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号