| 铝合金支架压铸数值模拟及压铸工艺研究 |
| |
| 引用本文： | 黄勇,郭继彬,黄尧,杜晓明,许明海,吴琼. 铝合金支架压铸数值模拟及压铸工艺研究[J]. 特种铸造及有色合金, 2011, 31(3): 232-234,191. DOI: 10.3870/tzzz.2011.03.012 |
| |
| 作者姓名： | 黄勇 郭继彬 黄尧 杜晓明 许明海 吴琼 |
| |
| 作者单位： | 沈阳理工大学材料科学与工程学院 |
| |
| 摘 要： | 利用ProCAST铸造模拟软件,对铝合金压铸件支架充型、凝固过程进行了数值模拟,得到了速度场、温度场的分布和变化规律。结果表明,浇注温度对压铸铝合金的模拟结果影响最大,其次为模具预热温度、充型速度。本试验条件下得到的优化工艺参数:浇注温度为600℃,模具预热温度为200℃,充型速度为2.5m/s。按照优化后的压铸工艺参数进行生产,得到了合格的铸件。
|
| 关 键 词： | 支架 压铸 数值模拟 |
Numerical Simulation of Die Casting 6063 Aluminum Alloy Bracket and Its Processing Parameters |
| |
| Huang Yong,Guo Jibin,Huang Yao,Du Xiaoming,Xu Minghai,Wu Qiong. Numerical Simulation of Die Casting 6063 Aluminum Alloy Bracket and Its Processing Parameters[J]. Special Casting & Nonferrous Alloys, 2011, 31(3): 232-234,191. DOI: 10.3870/tzzz.2011.03.012 |
| |
| Authors: | Huang Yong Guo Jibin Huang Yao Du Xiaoming Xu Minghai Wu Qiong |
| |
| Affiliation: | Huang Yong,Guo Jibin,Huang Yao,Du Xiaoming,Xu Minghai,Wu Qiong (School of Materials Science and Engineering,Shenyang Ligong University,Shenyang,China) |
| |
| Abstract: | Filling and solidification process of die casting 6063 aluminum bracket were simulated by the ProCAST software to obtain the distribution and change of velocity and temperature field. The results indicate that the factors influencing filling process are as follows in sequence: pouring temperature, pre-heating temperature of mould, filling velocity. The desirable aluminum alloy bracket was successfully produced with pouring temperature at 600℃ and pre-heating temperature of mould at 200℃ as well as filling velocity at 2.5 m/s. |
| |
| Keywords: | Bracket Die Casting Die Numerical Simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
