| 消失模铸钢件夹渣缺陷的形成机理分析 |
| |
| 引用本文： | 李增民,李立新,张田田.消失模铸钢件夹渣缺陷的形成机理分析[J].特种铸造及有色合金,2011,31(3):245-247,192. |
| |
| 作者姓名： | 李增民 李立新 张田田 |
| |
| 作者单位： | 1. 河北科技大学材料科学与工程学院
2. 石家庄住宅开发建设总公司科研所 |
| |
| 基金项目： | 科技部科技人员服务企业行动项目 |
| |
| 摘 要： | 消失模铸钢件极易产生夹渣及气孔缺陷。分析了消失模铸钢件夹渣缺陷的来源、形态分布、易出现的部位。从钢水充型形态分析出发,分析了充型钢水的湍流状态及附壁效应对夹渣形成的影响。从热力学和动力学角度分析了消失模铸钢件夹渣缺陷形成及移动机理,提出了消失模铸钢件减少夹渣缺陷的途径和建议。
|
| 关 键 词： | 消失模铸钢件 夹渣缺陷 形成及排出机理 |
Origination of Slag Inclusion in EPC Steel Casting |
| |
| Li Zengmin,Li Lixin,Zhang Tiantian.Origination of Slag Inclusion in EPC Steel Casting[J].Special Casting & Nonferrous Alloys,2011,31(3):245-247,192. |
| |
| Authors: | Li Zengmin Li Lixin Zhang Tiantian |
| |
| Affiliation: | Li Zengmin1,Li Lixin1,Zhang Tiantian2 (1. School of Materials Science and Engineering,Hebei University of Science and Technology,Shijiazhuang,China,2. Shijiazhuang Estate Development and Construction General Company,China) |
| |
| Abstract: | The slag inclusion and gas hole defects were generated easily in EPC steel castings. The source, shape distribution and position where slag inclusion easily occur were analyzed. According to the filling behavior of molten steel, influence of the turbulent flow and wall attachment effects of filling molten steel on formation of slag inclusion were approached. Based on the thermodynamics and kinetics, the forming and floating mechanism of the slag inclusion in EPC steel castings were described. The approaches... |
| |
| Keywords: | EPC Steel Casting Slag Inclusion Forming and Discharging Mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
