首页 | 本学科首页   官方微博 | 高级检索  
     

频域内插算法的铁路移频键控信号分析及仿真
引用本文:樊文侠,马静.频域内插算法的铁路移频键控信号分析及仿真[J].西安工业大学学报,2012(2):136-141.
作者姓名:樊文侠  马静
作者单位:西安工业大学电子信息工程学院,西安710032
摘    要:移频键控信号具有载频和调制频率都不唯一的多频特性,在傅氏变换后有频谱泄露的问题.讨论了产生频谱泄漏的本质原因.采用频域内插算法求出真实频率和其相邻离散频点的插值,利用此插值恢复出信号的真实频率,结合移频键控信号的频域特性,检测其参数特征值.仿真结果表明:文中方法能够检测出国产18信息移频键控信号和UM-71移频键控信号的载频和低频调制频率,载频误差在0.2Hz以内,低频调制频率误差在0.03Hz以内.

关 键 词:频域内插  移频键控信号  频谱泄漏  周期

Analysis of Railway Frequency-Shift Keying Signal Based on Interpolation Algorithm of Frequency Domain and Its Simulation
Authors:FAN Wen-Xia  MA Jing
Affiliation:(School of Electronic Information Engineering,Xi'an Technological University,Xi'an 710032,China)
Abstract:The Frequency-Shift Keying signal possesses characteristics of multi-frequency.The carrier frequency and modulation frequency are not exclusive,so spectral leakage may occur after Fourier Transform.The reason of spectral leakage is discussed.The frequency domain interpolation algorithm is used to find the interpolation between the real frequency and the adjacent discrete frequency,then the interpolation is used to recover the true frequency of the signal.Based on the true frequency and the frequency domain characteristics,the parameters of Frequency-Shift Keying signal are detected.The results of the simulation indicate that this method can detect the carrier frequency and the modulation frequency of low frequency with the home-made 18 information FSK signal and the UM-71 FSK signal.The carrier frequency errors are less than 0.2 Hz and the errors of modulation frequency of low frequency are less than 0.03 Hz,which all meet the requirements.
Keywords:interpolation algorithm  FSK signal  spectral leakage  cycle
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号