DDS技术和FPGA在多功能信号源中的应用 |
| |
引用本文: | 杨建华,于小宁,朗宝华.DDS技术和FPGA在多功能信号源中的应用[J].西安工业大学学报,2012(4):334-339. |
| |
作者姓名: | 杨建华 于小宁 朗宝华 |
| |
作者单位: | 西安工业大学电子信息工程学院,西安710032 |
| |
基金项目: | 西安工业大学校长基金(XAGDXJJ1013) |
| |
摘 要: | 针对信号源频率分辨率低、变频速度慢、频率准确度低、开发更新周期长等问题,采用四级流水线技术和EDA工具,设计并实现了一种以FPGA、高速D/A和低通滤波为核心,基于DDS技术的多功能信号源,并对DDS误差进行了分析.实验测试结果表明该系统硬件电路简单可靠,能够产生幅度和频率可调的正弦波、方波、三角波和锯齿波,频率范围在1×10-8~40MHz,频率分辨率可达0.01Hz,频率准确度在±0.1%内.具有频率分辨率高、处理速度快、输出灵活等特点.
|
关 键 词: | 直接数字频率合成 现场可编程门阵列 信号源 相位累加器 |
A Multifunction Signal Generator Based on DDS and Its Implementation on FPGA |
| |
Authors: | YANG Jian-hua YU Xiao-ning LANG Bao-hua |
| |
Affiliation: | (School of Electronic Information Engineering,Xi'an Technological University,Xi'an 710032,China) |
| |
Abstract: | Due to the questions of the low frequency resolution,the slow frequency conversion speed,the long cycle of development and update of the signal generator,a multi-function signal generator,which is based on DDS technology,is designed and implemented with four pipeline technique and EDA tool.The error analysis of DDS is given in the paper.The experiment results show: The system is simple and reliable and can generate sine wave,square wave,triangular wave and saw tooth wave;The frequency range of waves is between 0.01 Hz and 40 MHz,frequency resolution comes up to 0.01 Hz and frequency accuracy is less than ±0.1%,It has the characteristics of high frequency resolution,fast processing speed and flexible output. |
| |
Keywords: | direct digital synthesis field programmable gate array signal source phase accumulator |
本文献已被 维普 等数据库收录! |
|