首页 | 本学科首页   官方微博 | 高级检索  
     

光子晶体与单模光纤熔接对超连续谱展宽的影响
引用本文:房鸿,马瑞龙,韦会峰.光子晶体与单模光纤熔接对超连续谱展宽的影响[J].西安工业大学学报,2012(3):187-191.
作者姓名:房鸿  马瑞龙  韦会峰
作者单位:[1]西安工业大学理学院,西安710032 [2]深圳大学深圳市激光工程重点实验室,深圳518060 [3]长飞光纤光缆有限公司研发中心,武汉430073
摘    要:针对光子晶体光纤之间直接熔接损耗较大的问题.文中采用纳秒激光器作为泵浦源,通过光子晶体光纤与单模光纤HI-1060低损耗熔接的方法,研究了超连续谱的展宽过程,分析了超连续谱的产生机理.实验结果表明:泵浦源在重复频率为150kHz、泵浦功率为2.2W时,利用20m的光子晶体光纤与1m的单模光纤的熔接实现了输出功率为0.48W、光谱范围超过1100nm的超连续谱输出.

关 键 词:超连续谱  光子晶体光纤  光纤熔接  调制不稳定性  纳秒脉冲

Effect of Fiber Splicing of Photonic Crystal Fiber and Single-mode Fiber on Supercontinuum Generation
Authors:FANG Hong  MA Rui-long  WEI Hui-feng
Affiliation:1.School of Science,Xi'an Technological University,Xi'an 710032,China; 2.Key Lab of Laser Engineering of Shenzhen,Shenzhen University,Shenzhen 518060,China; 3.Yangtze Optical Fibre and Cable Company Ltd,Wuhan 430073,China)
Abstract:The experimental system of Supercontinuum generation by fiber splice has been demonstrated.In this system,photonic crystal fiber and normal single-mode fiber are used to reduce loss in order to solve the problem of splice among photonic crystal fiber.With a nanosecond pulsed laser as the pump source,the photonic crystal fiber and single-mode optical fiber of HI-1060 were spliced,on the basis of which the broadening process was analyzed.The results show that the 0.48 W supercontinuum with the spectral range over 1100 nm was demonstrated in splicing of a 20-m-long photonic crystal fiber and 1-m-long single-mode optical fiber at the average pump power of 2.2 W and the repetition rate of 150 kHz.
Keywords:supercontinuum(SC)  photonic crystal fiber(PCF)  fiber splicing  modulation instability(MI)  nanosecond pulse
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号