| 插齿时齿面挤伤与插齿刀后面非正常磨损的原因及解决措施 |
| |
| 引用本文： | 王敏之.插齿时齿面挤伤与插齿刀后面非正常磨损的原因及解决措施[J].工具技术,2006,40(2):49-52. |
| |
| 作者姓名： | 王敏之 |
| |
| 作者单位： | 湖南工程学院 |
| |
| 摘 要： | 介绍了插齿时产生齿面挤伤及插齿刀后面非正常磨损的特有现象,分析了其原因以及切屑的几种形态,给出了切削厚度分析计算的新方法,提出一套新见解和解决措施。
|
| 关 键 词： | 插齿 切削厚度 齿面挤伤 后面磨损 |
| 收稿时间： | 2005-07 |
| 修稿时间： | 2005-07 |
Causation and Solution of Extrusion Wound of Gear Face and Abnormal Abrasion of Tool Flank During Gear Shaping |
| |
| Wang Minzhi.Causation and Solution of Extrusion Wound of Gear Face and Abnormal Abrasion of Tool Flank During Gear Shaping[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2006,40(2):49-52. |
| |
| Authors: | Wang Minzhi |
| |
| Affiliation: | Wang Minzhi |
| |
| Abstract: | The extrusion wound of gear face and the abnormal abrasion of the inserting tool flank during gear shaping are introduced. Its formative causation and some of the chip shapes are analyzed. The new method of cutting thickness analysis and compute is given out. The new views and solutions for this problem are presented. |
| |
| Keywords: | gear shaping cutting thickness extrusion wound of gear face abrasion of tool flank |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
