Laser thermal gradient testing of air plasma sprayed multilayered,multi-material thermal barrier coatings |
| |
Authors: | Yingsang Wu Yao Wang Edward J. Gildersleeve V Pei-Feng Hsu Sanjay Sampath Mary Helen McCay |
| |
Affiliation: | 1. Center for Advanced Coatings, Florida Institute of Technology, Melbourne, Florida, USA;2. Mechanical Engineering Program, Florida Institute of Technology, Melbourne, Florida, USA;3. Center for Thermal Spray Research, Stony Brook, Long Island, New York, USA |
| |
Abstract: | Air plasma sprayed (APS) thermal barrier coatings (TBCs) are a widely used technology in the gas turbine industry to thermally insulate and protect underlying metallic superalloy components. These TBCs are designed to have intrinsically low thermal conductivity while also being structurally compliant to withstand cyclic thermal excursions in a turbine environment. This study examines yttria-stabilized zirconia (YSZ) TBCs of varying architecture: porous and dense vertically cracked (DVC), which were deposited onto bond-coated superalloys and tested in a novel CO2 laser rig. Additionally, multilayered TBCs: a two-layered YSZ (dense + porous) and a multi-material YSZ/GZO TBC were evaluated using the same laser rig. Cyclic exposure under simulative thermal gradients was carried out using the laser rig to evaluate the microstructural change of these different TBCs over time. During the test, real-time calculations of the normalized thermal conductivity of the TBCs were also evaluated to elucidate information about the nature of the microstructural change in relation to the starting microstructure and composition. It was determined that porous TBCs undergo steady increases in conductivity, whereas DVC and YSZ/GZO systems experience an initial increase followed by a monotonic decrease in conductivity. Microstructural studies confirmed the difference in coating evolution due to the cycling. |
| |
Keywords: | coatings plasma spraying sinter/sintering thermal barrier coatings |
|
|