| 基座注射模设计 |
| |
| 引用本文： | 朱伟珍. 基座注射模设计[J]. 模具工业, 2014, 0(4): 52-55 |
| |
| 作者姓名： | 朱伟珍 |
| |
| 作者单位： | 苏州大学机电工程学院,江苏苏州215137 |
| |
| 摘 要： | 通过对基座的工艺分析,介绍了带嵌件的塑件注射模设计要点和模具主要零件的制造。模具1出16件,采用镶拼组合结构,嵌件设计为带料形式,提高了生产效率。
|
| 关 键 词： | 基座 嵌件 注射模 制造工艺 |
Design of injection mould for base |
| |
| ZHU Wei-zhen. Design of injection mould for base[J]. Die & Mould Industry, 2014, 0(4): 52-55 |
| |
| Authors: | ZHU Wei-zhen |
| |
| Affiliation: | ZHU Wei-zhen (College of Mechanical and Electrical Engineering, Soochow University, Suzhou, Jiangsu 215137, China) |
| |
| Abstract: | The design points of an injection mould for a plastic base with insert and the manufacturing process of main parts were discussed based on the process analysis of the product. Sixteen parts ware manufactured in one mould in which combined inlaying struc ture was applied and the inserts were designed a.~ strin material |
| |
| Keywords: | base insert injection mould manufacturing process |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
