| TC4钛合金激光焊对接接头超塑变形显微组织 |
| |
| 引用本文： | 程东海,陈益平,胡德安,魏强.TC4钛合金激光焊对接接头超塑变形显微组织[J].焊接学报,2011,32(9):81-84. |
| |
| 作者姓名： | 程东海 陈益平 胡德安 魏强 |
| |
| 作者单位： | 南昌航空大学航空制造工程学院,南昌,330063 |
| |
| 基金项目： | 南昌航空大学博士启动金项目(EA201003048) |
| |
| 摘 要： | 采用金相显微镜观察了钛合金激光对接接头超塑性变形前后各区域显微组织,并分析其形成机理.结果表明,变形温度的增加或应变速率的降低有利于TC4合金接头超塑变形,母材晶粒发生一定程度的长大,且α相的数量相对减小,而晶间β相数量逐渐增加,两相都有等轴化趋势;焊缝超塑性变形时,针状组织增厚成为片层状.变形过程中片层组织被打断,片层长度变短,具有球化的趋势;超塑性变形后焊缝截面显微硬度最大为380 HV,与变形前焊缝相比降低约50 HV,满足实际承载需求.
|
| 关 键 词： | 钛合金 焊接/超塑成形 组织 |
| 收稿时间： | 2010/7/19 0:00:00 |
Microstrucutre analysis of superplastic deformation on laser butt weld Ti-6Al-4V joint |
| |
| CHENG Donghai,CHEN Yiping,HU Dean and WEI Qiang.Microstrucutre analysis of superplastic deformation on laser butt weld Ti-6Al-4V joint[J].Transactions of The China Welding Institution,2011,32(9):81-84. |
| |
| Authors: | CHENG Donghai CHEN Yiping HU Dean and WEI Qiang |
| |
| Affiliation: | CHENG Donghai,CHEN Yiping,HU Dean,WEI Qiang(School of Aeronautical Manufacturing Engineering,Nanchang Hangkong University,Nanchang 330063,China) |
| |
| Abstract: | Microstructures of welded joints before and after superplastic deformation were observed by optical microscope,and the forming mechanism was discussed.The results indicated that increasing temperature and decreasing velocity were good for superplastic deformation,and the grains of base metal grew coarser and the phase ratio increased.Needle-like martensite phase of weld bead became shorter and wider,exhibiting globing trend under higher temperature.The maximal microhardness of cross section of weld bead aft... |
| |
| Keywords: | titanium alloy welding/superplastic deformation mirostructure |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
|
