首页 | 本学科首页   官方微博 | 高级检索  
     

脉冲电源双熔敷极焊条电弧焊焊缝熔深
引用本文:菅明健,邹增大,王育福. 脉冲电源双熔敷极焊条电弧焊焊缝熔深[J]. 焊接学报, 2011, 32(9): 89-92
作者姓名:菅明健  邹增大  王育福
作者单位:山东大学材料液固结构演变与加工教育部重点实验室,济南,250061
基金项目:山东省自然科学基金资助项目(Z2006FF07)
摘    要:脉冲电源应用于双熔敷极焊条电弧焊,采用正交试验研究分析脉冲参数对焊缝熔深的影响.结果表明,脉冲参数的变化引起焊缝熔深的相应变化,脉冲参数对焊缝熔深的影响程度由大到小的次序为峰值电流、频率、占空比、基值电流.在试验范围内获得较大熔深时的脉冲参数分别是峰值电流为230~240 A,频率为3.3~3.7 Hz,占空比为48%...

关 键 词:脉冲参数  正交试验  熔深
收稿时间:2010-07-19

Investigation on penetration of pulsed twin deposition electrode arc welding
JIAN Mingjian,ZOU Zengda and WANG Yufu. Investigation on penetration of pulsed twin deposition electrode arc welding[J]. Transactions of The China Welding Institution, 2011, 32(9): 89-92
Authors:JIAN Mingjian  ZOU Zengda  WANG Yufu
Affiliation:JIAN Mingjian,ZOU Zengda,WANG Yufu(Key Laboratory for Liquid-Solid Structural Evolution & Processing of Materials Ministry of Education,Shandong University,Jinan 250061,China)
Abstract:Effects of pulsed parameters on weld penetration with the method of orthogonal experiment were researched when pulse power supply was applied to twin deposition electrode arc welding.Results of orthogonal experiment indicated the change of pulsed parameters could result in the corresponding change of weld penetration,and the descending order of pulsed parameters influencing weld penetration was as follows: peak current > frequency > duty ratio > base current.Greater penetration could be obtained with these ...
Keywords:pulsed parameters  orthogonal experiment  weld penetration  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号