| 半球形Al-Mg-Sc合金超塑胀形壁厚分布的有限元分析 |
| |
| 引用本文： | 芮玉龙,张益华,陈明和,左大平. 半球形Al-Mg-Sc合金超塑胀形壁厚分布的有限元分析[J]. 模具工业, 2006, 32(9): 20-23 |
| |
| 作者姓名： | 芮玉龙 张益华 陈明和 左大平 |
| |
| 作者单位： | 1. 南京航空航天大学,机电学院,江苏,南京,210016
2. 南京航空航天大学,机电学院,江苏,南京,210016;张家界航空工业职业技术学院,湖南,张家界,420017 |
| |
| 摘 要： | 应用MARC软件对半球形Al-Mg-Sc合金的超塑胀形进行仿真,分析了正反向超塑胀形对于半球形件壁厚分布的影响,以及不同深度的凹模对胀形结果的影响。结果表明,采用合理的正反胀形可以很好地改善成形件的厚度不均匀性,试验验证了仿真和试验结果比较吻合。
|
| 关 键 词： | 正反向胀形 有限元模拟 厚度分布 超塑性 |
| 文章编号： | 1001-2168(2006)09-0020-04 |
| 收稿时间： | 2005-10-12 |
| 修稿时间： | 2005-10-12 |
Finite element analysis on thickness distribution of superplastic bulging of Al-Mg-Sc alloy semisphere part |
| |
| RUI Yu-long,ZHANG Yi-hua,CHEN Ming-he,ZUO Da-ping. Finite element analysis on thickness distribution of superplastic bulging of Al-Mg-Sc alloy semisphere part[J]. Die & Mould Industry, 2006, 32(9): 20-23 |
| |
| Authors: | RUI Yu-long ZHANG Yi-hua CHEN Ming-he ZUO Da-ping |
| |
| Affiliation: | 1. College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astro- nautics, Nanjing, Jiangsu 210016, China ; 2. Zhangjiajie Aeronautical Professional Technology Academy, Zhangjiajie, Hunan 420017, China |
| |
| Abstract: | Commercial software MARC was used to simulate superplastic bulging process of Al-Mg-Sc alloy semisphere part. Not only was analysis made on the influence of superplastic direct and reverse bulging on the thickness distribution of semisphere part, but also of inverse die with variant deepness on the results. It was concluded that appropriate adoption of direct and reverse bulging could improve the situation of nonuniform thickness distribution. Experimental verification indicated that finite element simulation data tallied comparatively well with results of practical test. |
| |
| Keywords: | direct and reverse bulging finite element simulation thickness distribution superplasticity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
