| 固定架成形工艺及弯曲模设计制造 |
| |
| 引用本文： | 向开翔.固定架成形工艺及弯曲模设计制造[J].模具工业,2004(4):33-36. |
| |
| 作者姓名： | 向开翔 |
| |
| 作者单位： | 国营第711厂,湖北,荆州,434000 |
| |
| 摘 要： | 针对弯曲零件变形部位普遍存在表面质量不高的问题,以固定架成形为例,设计了一种全新的弯曲模,解决了弯曲件表面拉伤的问题,并详细介绍了该模具的特点和设计要点。
|
| 关 键 词： | 固定架 拉伤 弯曲模 活动凹模块 |
| 文章编号： | 1001-2168(2004)04-0033-04 |
| 修稿时间： | 2003年9月12日 |
The Technology for Forming the Fixing Frame and Design and Manuafcture of the Bending Die |
| |
| XIANG Kai-xiang.The Technology for Forming the Fixing Frame and Design and Manuafcture of the Bending Die[J].Die & Mould Industry,2004(4):33-36. |
| |
| Authors: | XIANG Kai-xiang |
| |
| Abstract: | Bent parts often have the problem of low surface quality at the bent area. With the fixingframe as an example, a totally new bending die has been designed, which completely solved the surface pull problem of the bent parts. The characteristics of the die and the main design points are introduced in detail. |
| |
| Keywords: | fixing frame pull bending die movable matrix block |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
