首页 | 本学科首页   官方微博 | 高级检索  
     

退火工艺对0.17C冷轧链条用钢板组织和性能的影响
引用本文:胡宽辉,田德新.退火工艺对0.17C冷轧链条用钢板组织和性能的影响[J].特殊钢,2008,29(5):61-62.
作者姓名:胡宽辉  田德新
作者单位:武汉钢铁(集团)公司研究院,武汉 430080
摘    要:在实验室真空加热炉内进行了1.0 min冷轧链条用钢板650~690℃、2~6h的罩式退火模拟试验。结果表明,冷轧链条用钢的组织为铁索体+游离渗碳体,增加退火温度和时间,钢的组织趋向均匀,退火后钢的抗拉强度Rm为395~415 MPa;增加退火温度和时间,HRB硬度值从68.9降至65.0,伸长率由36%增加至39%。该退火工艺可用于工业性生产。

关 键 词:冷轧链条钢  罩式退火  组织  力学性能  
收稿时间:2008-03-10

Effect of Annealing Process on Structure and Properties of 0.17C Cold Rolled Steel Sheet for Chain
HU Kuanhui,Tian Dexin.Effect of Annealing Process on Structure and Properties of 0.17C Cold Rolled Steel Sheet for Chain[J].Special Steel,2008,29(5):61-62.
Authors:HU Kuanhui  Tian Dexin
Affiliation:Research and Development Center of Wuhan lron and Steel Croup Corp,Wuhan 430080
Abstract:The simulating batch annealing test of 1.0 mm cold rolled steel sheet for chain at 650~690 ℃ for 2~6 h has been carried out by vacuum heating fumace in laboratory.Results showed that the structure of cold rolled steel for chain was ferrite + free cementite,with increasing anncaling temperature and time the structure of steel tended to homogeneous; the tensile strength of annealed steel was 395~415 MPa,with increasing annealing temperature and time the HRB hardness value of steel decreased from 68.9 to 65.0 and the clongation of steel increased from 36% to 39%.The annealing process is available for commercial production.
Keywords:Cold Rolled Steel for Chain  Batch Annealing  Structure  Mechanical Properties  
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号