|
|||||
|
|
| PLC应用于三偏心蝶阀等离子喷焊系统的设计 | |
| 引用本文： | 焦雷,李春旭,陈克选,李惠.PLC应用于三偏心蝶阀等离子喷焊系统的设计[J].热加工工艺,2007,36(7):59-61. |
| 作者姓名： | 焦雷 李春旭 陈克选 李惠 |
| 作者单位： | 1. 江苏大学,材料科学与工程学院,江苏,镇江,212013 2. 兰州理工大学,材料科学与工程学院,甘肃,兰州,730050 3. 江苏科技大学,材料科学与工程学院,江苏,镇江,212003 |
| 摘 要： | 三偏心蝶阀等离子喷焊不仅工艺过程复杂，并且涉及到单片机80C196KC为核心的跟踪系统，因此对控制系统的可靠性要求很高。采用可编程控制器（PLC）控制有助于提高三偏心蝶阀喷焊质量与系统稳定性。文中介绍了三偏心蝶阀及其等离子喷焊过程控制的要求、PLC的硬件系统设计与喷焊工艺软件程序设计。 |
| 关 键 词： | 可编程控制器 单片机 等离子喷焊 三偏心蝶阀 |
| 文章编号： | 1001-3814(2007)01-0059-03 |
| 修稿时间： | 2006-12-14 |
Design of PLC Applying to Plasma Spray Welding System for Triple Eccentric Butterfly Valve |
|
| JIAO Lei,LI Chun-xu,CHEN Ke-xuan,LI Hui.Design of PLC Applying to Plasma Spray Welding System for Triple Eccentric Butterfly Valve[J].Hot Working Technology,2007,36(7):59-61. | |
| Authors: | JIAO Lei LI Chun-xu CHEN Ke-xuan LI Hui |
| Abstract: | The technical process of the plasma spray welding for triple eccentric butterfly valve was complex, and related to tracking system of MCU-80C196KC, required the reliability for the controlling system to be high. Applying PLC to the plasma spray welding system was helpful for enhancing the quality of triple eccentric butterfly valve and the system stability. The requirement of plasma spray welding, the hardware design of PLC control system and the software design of spray welding technical program were introduced. |
| Keywords: | PLC MCU plasma spray welding triple eccentric butterfly valve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |