Enhanced Soil Flushing for Simultaneous Removal of PAHs and Heavy Metals from Industrial Contaminated Soil

Polycyclic aromatic hydrocarbons (PAHs) and heavy metals are environmental concerns and must be removed to acceptable levels. This paper evaluates different flushing agents to enhance the remediation of soil contaminated with PAHs and heavy metals at a former manufactured gas plant site. Four flushing column tests at a constant hydraulic gradient of 1.2 were conducted using four different flushing agents, which included deionized water, chelant (0.2?M EDTA), surfactant (5% Igepal CA-720), and cyclodextrin (10% hydroxypropyl-β-cyclodextrin or HPCD). Additional column tests using Igepal and HPCD at a lower hydraulic gradient of 0.2 were conducted to investigate the effects of rate-limited desorption or solubilization of PAHs. The results showed that the EDTA produced the maximum metal removal from the soil compared with deionized water, Igepal, and HPCD under different hydraulic gradient conditions. The 0.2?M EDTA flushing solution removed approximately 25–75% of the toxic heavy metals found in the soil. None of the PAHs were removed from the soil when deionized water and EDTA were the flushing solutions. The PAHs removal efficiencies in the Igepal and HPCD systems decreased as the hydraulic gradient decreased. However, the surfactant-enhanced systems were more efficient in removing PAHs from the soil than the HPCD systems under high- and low-hydraulic gradients. The results also demonstrated that the removal of PAHs in surfactant-enhanced systems depended upon the micelles formation, whereas in the HPCD-enhanced systems, it depended upon the sterioselective diffusion of the PAHs to the nonpolar cavity of the HPCD. Overall, this study showed that the contaminant removal in soil flushing systems depends on the flushing solution affinity and selectivity toward the target contaminant and the existing hydraulic gradient condition.