Process Modeling of Storm-Water Flow in a Bioretention Cell |
| |
Authors: | Zhuangxiang He Allen P. Davis |
| |
Affiliation: | 1Graduate Research Assistant, Dept. of Civil and Environmental Engineering, Univ. of Maryland, College Park, MD 20742. E-mail: zxhe.work@gmail.com 2Professor, Dept. of Civil and Environmental Engineering, Univ. of Maryland, College Park, MD 20742. E-mail: apdavis@umd.edu
|
| |
Abstract: | A two-dimensional variable saturated flow model was developed to simulate subsurface flow in bioretention facilities employing the Richards’ equation. Variable hydrologic performances of bioretention are evaluated using the underdrain outflow hydrographs, outflow volumes for 10 storms with various duration and depth, and flow duration curves for 25 different storms. The effects of some important design parameters and elements are tested, including media type, surrounding soils, initial water content, ratio of drainage area to bioretention surface area, and ratio of cell length to width. Model results indicate that the outflow volume via underdrain is less than the inflow; the flow peak is significantly reduced and delayed. Underdrain outflow volume from loamy sand media (with larger Ks) is larger than that from sandy clay loam media. The saturated hydraulic conductivity, storage capacity, and exfiltration into surrounding soils contribute to the hydrologic performance of a bioretention cell. Initial media storage capacity is affected by the hydraulic properties of media soils, initial water content, and bioretention surface area. The exfiltration volume is determined by the surrounding soil type and exfiltration area, dominated by flow through the bottom of the media. |
| |
Keywords: | Urban areas Stormwater management Runoff Biological processes Hydrologic models |
|
|