| 红色长余辉发光材料纳米硫氧化钇的热处理研究 |
| |
| 引用本文： | 刘晓霞,李向果,彭桂花,梁振华. 红色长余辉发光材料纳米硫氧化钇的热处理研究[J]. 湖北化工, 2012, 0(4): 34-36 |
| |
| 作者姓名： | 刘晓霞 李向果 彭桂花 梁振华 |
| |
| 作者单位： | [1]江汉大学文理学院,湖北武汉430056 [2]广西师范大学,广西桂林541004 [3]河南质量工程职业学院,河南平顶山467000 |
| |
| 基金项目： | 武汉市教育局2010年市属高校科研课题（2010152） |
| |
| 摘 要： | 对燃烧法合成的红色长余辉发光材料纳米Y2O2S：Eu3＋,Mg2＋,Ti 4＋进行了热处理,采用X-射线粉末衍射仪（XRD）、扫描电镜（SEM）、荧光光谱仪（PL）、亮度计等对发光材料进行了表征。结果表明,最佳热处理温度为800℃;热处理后的发光材料的主要物相仍为Y2O2S、粒径略有增大、宽带吸收峰略有红移、发射峰位置不变、初始亮度提高、衰减变慢。
|
| 关 键 词： | 长余辉 热处理 硫氧化钇（Y2O2S） |
Study on Heat Treatment of Nanocrystalline Yttrium Oxide Sulfide Red Long Afterglow Phosphor |
| |
| LIU Xiao-xia,LI Xiang-guo,PENG Gui-hua,LIANG Zhen-hua. Study on Heat Treatment of Nanocrystalline Yttrium Oxide Sulfide Red Long Afterglow Phosphor[J]. Hubei Chemical Industry, 2012, 0(4): 34-36 |
| |
| Authors: | LIU Xiao-xia LI Xiang-guo PENG Gui-hua LIANG Zhen-hua |
| |
| Affiliation: | 1.College of Arts ＆ Science,Jianghan University,Wuhan 430056,China; 2.Guangxi Normal University,Guilin 541004,China; 3.Henan Quality Polytechnic,Pingdingshan 467000,China) |
| |
| Abstract: | Heat treatment of nanocrystalline Y2O2S：Eu3＋,Mg2＋,Ti4＋ red long afterglow phosphor synthesized by combustion method was carried out in the article.The phosphor was characterized by XRD,SEM,PL and luminance meter.The results showed that the optimum heat treatment temperature was 800 ℃.After heat treatment,the main phase of phosphor was Y2O2S,the particle size increased slightly,the broadband absorption peak had a slight red-shift,the emission peak didn′t change in position,the initial brightness increased and declined slowly. |
| |
| Keywords: | long afterglow heat treatment yttrium oxide sulfide（Y2O2S） |
| 本文献已被 维普 等数据库收录！ |
|
