A numerical and experimental study of preformed angle in the lap zone on adhesively bonded steel single lap joint |
| |
| Authors: | Min You Zhi Li Xiao-ling Zheng Shan Yu Gang-yan Li De-xin Sun |
| |
| Affiliation: | 1. College of Mechanical and Material Engineering, China Three Gorges University, No. 8 Daxue Road, Yichang 443002, China;2. School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China |
| |
| Abstract: | The effect of a preformed angle in the lap zone of steel adherends on the stress distribution in adhesively bonded single lap joints was investigated using an elasto-plastic finite element analysis (FEA). The ultimate loads of the joints were determined by shear tests and the failure surfaces of the lap zone were analyzed using scanning electron microscopy (SEM). The results from the numerical simulation showed that all the peak stresses in the mid-bondline of the adhesively bonded single lap joint were reduced as the preformed deflection angle was increased from 0° to 15°. The highest value of the average ultimate load of the experimental joints occurred when the preformed angle was equal to 7° (about 64% higher than the standard one). The SEM images also indicated that the failure mode in the overlap zone of the joint changed from that of a mainly adhesion one to a mixed one as the preformed angle increased. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
