Stress analysis of the adhesive resin layer in a reinforced pin-loaded joint used in glass structures |
| |
Authors: | QD To Q-C He M Cossavella K Morcant A Panait |
| |
Affiliation: | 1. Université Paris-Est, Laboratoire de Modélisation et Simulation Multi Echelle, FRE 3160, CNRS, 5 Boulevard Descartes, F-77454 Marne-la-Vallée Cedex 2, France;2. Centre Scientifique et Technique du Bâtiment (CSTB), 84 Avenue Jean Jaurès, 77447 Marne-la-Vallée Cedex 2, France |
| |
Abstract: | A reinforced pin-loaded joint used to assemble elements in a tempered glass structure consists of a steel bolt and a steel ring glued to a glass plate through an adhesive resin layer. The stiffness of a typical resin material is generally much lower than the stiffness of steel or glass. This fact leads us to make the assumption that the stress field in the adhesive resin layer is essentially due to the relative rigid displacements of the steel ring with respect to the glass plate. On the basis of this assumption, an analytical solution is obtained for the stresses in the adhesive resin layer. This solution is compared with and validated by the numerical results obtained by the finite element method. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|