Performance-based analysis of concrete-filled steel tubular beam–columns,Part II: Verification and applications |
| |
Authors: | Qing Quan Liang |
| |
Affiliation: | School of Architectural, Civil and Mechanical Engineering, Victoria University, PO Box 14428, Melbourne, VIC 8001, Australia;Faculty of Engineering and Surveying, University of Southern Queensland, Toowoomba, QLD 4350, Australia |
| |
Abstract: | The theory and algorithms of a performance-based analysis (PBA) technique for the nonlinear analysis and performance-based design of thin-walled concrete-filled steel tubular (CFST) beam–columns with local buckling effects were presented in a companion paper. Initial local buckling and effective strength/width formulas for steel plates are incorporated in the PBA program to account for local buckling effects. Performance indices are used in the PBA program to quantify the section, axial ductility and curvature ductility performance of thin-walled CFST beam–columns. This paper presents the verification and applications of the PBA program developed. The axial load–strain curves, ultimate axial loads and moment–curvature curves for thin-walled CFST columns predicted by the PBA program are verified by experimental data. The PBA program is then utilized to investigate the effects of local buckling, depth-to-thickness ratio, concrete compressive strengths, steel yield strengths and axial load levels on the stiffness, strength and ductility performance of thin-walled CFST beam–columns under axial load and biaxial bending. The PBA technique developed is shown to be efficient and accurate and can be used directly in the performance-based design of thin-walled CFST beam–columns and implemented in advanced analysis programs for composite columns and frames. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|