| 亚温淬火对20SiMn2MoV钢低温韧度的影响 |
| |
| 引用本文： | 高万夫,雷晓维,石铁.亚温淬火对20SiMn2MoV钢低温韧度的影响[J].石油机械,2011(9):1-4,29,5. |
| |
| 作者姓名： | 高万夫 雷晓维 石铁 |
| |
| 作者单位： | 中国石油大学(北京)材料科学与工程系; |
| |
| 基金项目： | 中石化集团公司项目“高寒地区石油装备与材料研究”(JW08001) |
| |
| 摘 要： | 采用常规热处理工艺和亚温淬火工艺对20SiMn2MoV钢进行热处理,以研究亚温淬火对20SiMn2MoV钢低温韧度的影响。研究结果表明,亚温淬火工艺可使20SiMn2MoV钢获得板条马氏体+针状铁素体的组织,能有效地提高其低温韧度;亚温淬火温度在800～840℃时,随着淬火温度的升高,铁素体的形态由块状变为针状,材料的低温韧度得到提高;常规热处理工艺试样的低温韧度不满足API 8C标准要求,而采用预备热处理为900℃淬火、最终热处理为840℃淬火+200℃回火的亚温淬火工艺,可使材料的低温冲击韧度和拉伸性能均满足API 8C标准要求。
|
| 关 键 词： | 亚温淬火 20SiMn2MoV钢 低温韧度 夏比冲击试验 力学性能 |
The effect of subcritical quenching on the low-temperature toughness of the 20SiMn2MoV steel |
| |
| Gao Wanfu,Lei Xiaowei,Shi Tie.The effect of subcritical quenching on the low-temperature toughness of the 20SiMn2MoV steel[J].China Petroleum Machinery,2011(9):1-4,29,5. |
| |
| Authors: | Gao Wanfu Lei Xiaowei Shi Tie |
| |
| Affiliation: | Gao Wanfu,Lei Xiaowei,Shi Tie(Department of Materials Science and Engineering,China University of Petroleum,Beijing) |
| |
| Abstract: | To study the effect of subcritical quenching on the low-temperature toughness of the 20SiMn2MoV steel,the ordinary thermal treatment technology and the subcritical quenching technology were adopted to conduct the thermal treatment of the steel.The result shows that the subcritical quenching technology can make the steel obtain the texture of lath martensite plus acicular ferrite and can effectively improve the low-temperature toughness of the steel.When the subcritical quenching temperature falls between 80... |
| |
| Keywords: | subcritical quenching 20SiMn2MoV steel low-temperature toughness Charpy impact test mechanical performance |
| 本文献已被 CNKI 等数据库收录！ |
|
