| 氮元素对SW333耐蚀塑料模具钢性能的影响 |
| |
| 引用本文： | 陈卓,袁森,吴晓春.氮元素对SW333耐蚀塑料模具钢性能的影响[J].上海金属,2011,33(5):41-44. |
| |
| 作者姓名： | 陈卓 袁森 吴晓春 |
| |
| 作者单位： | 上海大学材料科学与工程学院,上海,200072 |
| |
| 基金项目： | “十一五”国家科技支撑计划课题:高品质模具钢锻材关键技术开发(2007BAE51B04); 上海市重点学科建设项目资助(S30107) |
| |
| 摘 要： | 通过车削试验、浸泡试验和极化曲线的测定,研究了氮对耐蚀塑料模具钢切削性能和耐腐蚀性能的影响,并与4Cr13钢作了比较。研究结果表明含氮SW333钢的切削性能和耐蚀性均优于4Cr13钢,氮元素提高了耐蚀塑料模具钢的切削性能和耐腐蚀性能。
|
| 关 键 词： | SW333耐蚀塑料模具钢 氮元素 切削性能 耐腐蚀性能 |
INFLUENCE OF NITROGEN ON PROPERTIES OF CORROSION RESISTANT PLASTIC DIE STEEL SW333 |
| |
| Chen Zhuo,Yuan Sen,Wu Xiaochun.INFLUENCE OF NITROGEN ON PROPERTIES OF CORROSION RESISTANT PLASTIC DIE STEEL SW333[J].Shanghai Metals,2011,33(5):41-44. |
| |
| Authors: | Chen Zhuo Yuan Sen Wu Xiaochun |
| |
| Affiliation: | Chen Zhuo Yuan Sen Wu Xiaochun(School of Materials Science and Engineering,Shanghai University) |
| |
| Abstract: | Effects of nitrogen adding on the cutting ability,corrosion resistance and polarization curves of corrosion resistant of the plastic die steel SW333 were presented by means of machining test and corrosion test,and compared with 4Cr13 steel.The results showed that the cutting ability and corrosion resistance of SW333 steel were better than that of 4Cr13 steel.The Nitrogen element increased the cutting ability and corrosion resistance of corrosion resistant plastic die steel. |
| |
| Keywords: | SW333 Corrosion Resistant Plastic Die Steel Nitrogen Cutting Ability Corrosion Resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
