| PC机控制的异种材料粘接强度测试平台的研制 |
| |
| 引用本文： | 王锋,宋永伦,陈志翔.PC机控制的异种材料粘接强度测试平台的研制[J].粘接,2006,27(2):7-9. |
| |
| 作者姓名： | 王锋 宋永伦 陈志翔 |
| |
| 作者单位： | 北京工业大学机电学院焊接研究所,北京,100022 |
| |
| 摘 要： | 根据粘接接头的特点和需要,自行设计和制造了异种材料粘接强度测试平台。该平台由三维CAD设计软件进行设计,采用图形化编程语言Labview进行了系统控制软件的编写。经过实验验证,该系统能够准确地测量异种材料粘接接头的拉伸剪切强度,并且能够对采集的拉伸信息进行过程分析以及参数保存,满足了粘接接头拉伸过程测试的需要。同时,比较了不同表面处理方法对粘接强度的影响,验证了通过等离子气体表面处理可以显著提高粘接强度。
|
| 关 键 词： | 粘接 剪切拉伸测试 CAD Labview |
| 文章编号： | 1001-5922（2006）02-0007-03 |
| 收稿时间： | 2005-11-16 |
| 修稿时间： | 2005年11月16 |
PC controlled testing platform of bonding strength for different materials |
| |
| WANG Feng,SONG Yong-lun,CHEN Zhi-xiang.PC controlled testing platform of bonding strength for different materials[J].Adhesion in China,2006,27(2):7-9. |
| |
| Authors: | WANG Feng SONG Yong-lun CHEN Zhi-xiang |
| |
| Abstract: | According to the characteristics and requirements of the adhesive joint,the authors design and set up the testing platform of bonding strength for different materials.The platform is designed by 3-demension CAD software,the system controlling software is compiled by Labview,a graphic programming language.The system can measure the lap-shear strength of adhesive joint made by different materials accurately and can analysis the information which is acquired during lap-shear processing.All of these fulfill the needs of lap-shear testing of adhesive joints.The authors compare the influence of different surface treatment method on the strength of adhesion.It is proved that after plasma gas surfacing treatment,the strength of adhesion can be increased evidently. |
| |
| Keywords: | adhesive lap-shear testing CAD Labview |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
