Influence of the magnetic field on the alignment degree of the anisotropic strontium ferrites for elastomer bonded magnets

In this work, the influence of the magnetic field on the alignment degree of the magnetic particles and on the magnetic energy flux of elastomer bonded magnets are investigated. For the investigations, a strontium ferrite filled nitrile butadiene rubber is used. The change of magnetic flux density in the injection molding tool cavity was realized by changing the current at the rectifier. The alignment degree of the magnetic particles increases with increasing magnetic field in the injection molding tool cavity. Above a certain current strength, a saturation behavior of the alignment degree of the magnetic particles and the magnetic energy flux is reached. The change of the cavity magnetic field leads to an improvement of the pole angle error up to a current of 10 A. An increase of the current above 10 A leads to hardly any improvement of the pole angle error, since a saturation in the alignment of the magnetic particles has already been reached.