| 数控车床手工螺纹对刀 |
| |
| 引用本文： | 蔡善乐,马志宏.数控车床手工螺纹对刀[J].机床与液压,2004(9):177-178. |
| |
| 作者姓名： | 蔡善乐 马志宏 |
| |
| 作者单位： | 兰州理工大学机电工程学院,兰州,730050 |
| |
| 基金项目： | 兰州理工大学科技发展基金 |
| |
| 摘 要： | 针对数控车床修复加工石油钻杆锥螺纹遇到的对刀问题，提出了利用零位信号控制外部指示灯进行手工螺纹对刀，实现旧螺纹修复加工，简单易行．效果良好。
|
| 关 键 词： | 数控车床 螺纹对刀 零位信号 修复加工 |
| 文章编号： | 1001-3881(2004)9-177-2 |
| 修稿时间： | 2003年9月8日 |
Manual Presetting Cutter of Manufacturing Thread in NC Lathe |
| |
| CAI Shan-le,MA Zhi-hong.Manual Presetting Cutter of Manufacturing Thread in NC Lathe[J].Machine Tool & Hydraulics,2004(9):177-178. |
| |
| Authors: | CAI Shan-le MA Zhi-hong |
| |
| Abstract: | In accordance with the issue of presetting cutter in repairing conical thread of rod used oil driller in NC lathe,in this article,the method that uses zero's signal to control external indicator lamp during manual presetting cutter of thread's repair is put forward.Through practice,it can fulfil repairing old thread and be feasible,simple and effectiveness. |
| |
| Keywords: | NC lathe Presetting cutter of manufacturing thread Zero's signal Repair |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
